Water rescue vehicle – “Aqua”

The water rescue vehicle combines the highest quality with innovative technology and is specially adapted to the requirements of water rescue. In addition, we offer you the opportunity to customize the vehicle to suit the intended purpose with a wide range of optional equipment.

Highlights

Trough-shaped spray floor – Specially for the requirements of water rescue
Flexible seating system – can be arranged facing the direction of travel or against it
Safe accommodation – Tested safety solutions for material and equipment
Impregnated interior components and perfected surfaces for water rescue
Diving equipment holder with release and coupling mechanism to US military standard – Teflon-impregnated and seawater-resistant

Standard equipment

Base vehicle

Mercedes-Benz Sprinter L2H2 (wheelbase 3,665mm, high roof)
All-wheel drive (4×4)
Including complete ceiling cladding
permissible. Total weight: 4.1t

Exterior

230 Volt external power supply DEFA
LED ambient lighting Track 40, arranged 1x left and 1x right
Swivel rear worklight, rear right
Mechanical door-combined step Side entry

Interior driver's compartment

Driver’s compartment cabinet graphite black
Spotlight above front passenger
INOMATIC control units in body cover
Half-height partition wall behind driver/co-driver to accommodate electrical components etc.
230 volt surface-mounted socket for charger

Interior of crew/equipment room

Clothes rail with fall protection for wetsuits, turnout gear
3 comfort seats, M1-tested with adjustable headrest, black imitation leather cover, seat arrangement against the direction of travel
Removable storage tray on half-height partition wall
Brackets for 2 Euro Fix Box (400x300x200 mm) under comfort seat
Entry handle with reinforcement on C-pillar
Auxiliary heater with step protection cover for air vents in the crew compartment
Spray floor dark gray/light gray, tub-shaped for water rescue vehicles
Drainage channel with drain pipe integrated in the spray floor
ABS interior trim
Shelving system on the left for holding diving equipment, incl. shelf attachment
Bracket for diving equipment: Seawater-resistant bracket for holding diving equipment with a coupling mechanism
Shelving system on the right to accommodate 6 Euro Fix boxes (600x400x270mm)
Bracket for Spineboard Combi Carrier II
Airline rails on the backs of the left and right shelves, including fitting and tensioning strap with ratchet
Hand-held fire extinguisher with holder
3 recessed LED lights in the crew and equipment room
3 USB-C/A double sockets
Drawer cabinet with 3 drawers and bottom flap

Signaling technology

3 LED beacons, arrangement: front left and right, rear left
Front flasher
Tone sequencer with compressor simulation
Rear beacon can be switched off separately

Electrics

Battery charger for starter and auxiliary battery
Charging booster, intelligent charging management
230 volt central distribution board with residual current circuit breaker (RCCB) and potential equalization
12 volt central electrics

Radio/communication technology

Radio antenna for digital radio TETRA/GPS
Installation of SIM card reader provided including SiKaPlug mounting unit, integrated in the center console
Radio interference suppression filter
Radio master switch with time relay
Radio loudspeaker integrated in ceiling
Installation of supplied digital radio with hand-held control unit in the center console in the driver’s compartment
MRT programming interface in the center console
Digital hands-free kit with gooseneck PTT switch box
Mounting and connecting the HRT charging cradle

Basic/bodywork

Body protection:

Cavity preservation: Reinforced cavity sealing offers the best corrosion protection and increases the service life of water rescue vehicles by several years
Underbody protection: coating of the entire underbody with a permanently elastic off-road underbody protection

Equipment options

Base vehicle

Mercedes-Benz Sprinter L2H1 (wheelbase 3,665mm, flat roof)
Rear-wheel drive (4×2)
Off-road tires

Exterior

Additional ambient light left and right
Surrounding light at the rear instead of work light
Flag holder
Branch deflector for signal system/Martin flutes on the roof
Ventilator on the roof
230 volt external power supply RETTBOX
WARN cable winch with cable winch mounting kit
Awning with awning front box

Interior driver's compartment

USB-C/A socket

Interior of crew/equipment room

Single comfort seat with adjustable headrest, positioned on the left in the direction of travel, instead of drawer unit
Armrest for seat, sliding door entry area
Hand-held spotlight with charging station
Shelving system left analogous to shelving system right for 6 Euro Fix boxes instead of immersion devices
Hygiene module consisting of: Eye wash bottle, hand brush, soap dispenser, 5 liter water canister with tap, towel dispenser, 3-fold glove dispenser, arrangement: rear door
Holder for helmets
Rear door cladding with aluminum duet panel
Airline rails to the front of the right-hand shelving system, including fitting and tensioning strap with ratchet
Airline rails arranged on the floor between the two shelving systems, including fitting and tensioning strap with ratchet
12 volt power socket
LED recessed lights with night lighting (in red, green or blue)
Removable table, arrangement when not in use: on the front of the right-hand shelf